|
AGNEE CAST IRON SERIES WORM GEAR BOXES
SOLID FOOT & ADAPTABLE WORM SPEED REDUCERS
Installation and Maintenance
|
Lubrication
The AGNEE Worm Speed Reducer lubrication system is self contained positive and automatic at all speeds of operation and
in either direction of rotation. Adaptable units are provided with breather,
oil level and drain plugs and it must be ensured that these are correctly
positioned as shown on the accompanying diagram. Other units incorporate a
dipstick for oil level checking, an oil filler-cum-ventilator and drain plugs.
Their locations are shown on the following page.
AGNEE Worm Speed Reducer units are supplied without
oil and must be filled with the correct grade of lubricant to the correct
level. It is important to ensure that the correct oil level is not exceeded as over filling causes oil
churning, resulting in overheating and leakage.
|
RECOMMENDED LUBRICANT
ISO VG320
|
Brand |
Grade |
|
Bharat Petroleum. |
Cabol 320 or Amocam 320 |
Castrol |
Alpha ZN320 |
Castrol |
Alpha ZN320 |
Gulf |
Harmony 320 |
Hindustan Petroleum |
Enklo 320 |
Indian Oil |
Servomesh SP320 or
Servosystem 320 |
Veedol |
Avalon 320 |
| |
|
 |
|
<<back
1
2
3
4
5
6
7
next>>
|
|
|
Inline Helical Geared Motor
Inline Helical Geared Motor
Model: IH 07 Series - IH 87 Series
Input
power: 0.18KW-10KW;
Transmission ratio: 4-279
|
|
Horizontal Worm Gearboxes
Horizontal Worm Gearbox
Ratio from 5:1 to 4900:1
Center Distances from 40 mm to 400 mm;
Single Stage or Multiple Stage Reduction;
Teeth Size from 1 module |
|
