Horizontal Worm Gearbox

Dimensional Chart of Horizontal Worm Gearbox
Selection Criterion of Worm Gearbox
Installation and Maintenance of Worm Gearbox

The AGNEE Worm Speed Reducers (gearbox) have Cast Iron Gear Case of streamlined design completely air tight, dust

proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened,

tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated

on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin

of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus,

no special care is required except for occasional oil topping to the required level. Air cooling is affected by means

of standard polypropylene or metal fans. Apart from standard range, Gear Boxes are also tailor made  to suit individual requirement or as per specifications provided. They are available in:

Horizontal Worm Gear Boxes

·         Vast range of Models suit every individual's requirement

        Available Models are:

       75, 100, 125, 150, 175, 200, 250, 300, 350, 430

·         Ratio 30:1 or 40:1 are usually available Ex-stock or on short notice

·         Center Distances from 40 mm to 400 mm

·         In Single or Double Stage Reductions

·         Ratios from 5:1 to 4900:1

·         Also made as per customer's specifications, Drawing, requirements

·         Overhauling of Old Gear Boxes also undertaken, Early delivery schedules

<<back

Our Dealers in India | Online Industrial Resources
Helical Gearbox |Adaptable Worm Gearbox | Inline Helical Geared Motor | Racks and Pinions | Pump Jack Helical Gearbox
Shaft Mounted Speed Reducer | Worm Gear Motor | Chain Sprocket | Vertical Worm Gearboxes | Horizontal Worm Gear Boxes
Planetary Gearbox | Double Reduction Worm Gearbox