Agnee - Manufacturer and exporter of Helical gearbox, helical gears, industrial gearbox, Inline helical geared motor, racks pinions, worm geared motor, helical shaft mounted speed reducer


Home \| Products \| About Us \| Contact Us \| Warranty \| Complaint

Helical Gearbox

The AGNEE Helical Gearboxes Housing is usually made of Close Grain Cast Iron or Structural Steel. They are rugged, corrosion resistant and absorb shock and vibration.
The Reducer Gearing is Helical type made from high quality alloy steel, hobbed, gas carburized, tempered and surface finish to class 10 AGMA quality. That leads to a very good efficiency and a quiet working condition.

The shafts are from alloy steel forging or bars heat treated. Low speed shafts can be solid or hollow type. Bearings are fitted on a ground journal and are spherical roller or/ and taper roller type.

Helical Gear Boxes
Helical Gearbox

Apart from standard range, Helical Gearboxes are also tailor made to suit individual requirement or as per specifications provided. Helical Gearboxes are available in:

·    Center Distances from 175 mm to 750 mm

·    Single Stage or Multiple Stage Reduction

·   Ratio from 2:1 to 625:1

·   Tailor-made as per Specification, Drawings or Sample

·    For Automobile and Industrial uses

·    Teeth Size from 1 module

<<back

Inline Helical Geared Motor
Model: IH 07 Series - IH 87 Series
Input power: 0.18KW-10KW;
Transmission ratio: 4-279

Horizontal Worm Gearbox
Ratio from 5:1 to 4900:1
Center Distances from 40 mm to 400 mm;
Single Stage or Multiple Stage Reduction;
Teeth Size from 1 module